Hoʻomaikaʻi i ka Koozie Production me ka ʻoki ʻoki a me ke kahakaha ʻana

Hoʻonui i ke ʻano o Koozie me ka hoʻoponopono ʻana i ka laser

Hoʻonui i nā Koozies Production

Ma ka mākeke o kēia lā,custom can kooziesʻoi aku ka kaulana ma mua o ka manawa, e hāʻawi ana i kahi paʻi pilikino no nā hanana, nā hoʻolaha, a me ka hoʻohana ʻana i kēlā me kēia lā. Ma ka hoʻohana ʻanaka hana ʻana i ka laser - ka ʻoki ʻana i ka laser a me ke kahakaha ʻana i ka laser, hiki iā ʻoe ke hoʻokō i nā koozies kiʻekiʻe, i hana ʻia e kū i waho. Inā he kauoha maʻamau hoʻokahi a i ʻole he pūʻulu nui no ka hōʻailona ʻoihana, hōʻoia ka ʻenehana laser i ka pololei a me ka pono i ka hana.

1. He aha ia Koozie?

ʻO kahi koozie, ʻike ʻia hoʻi ʻo ka mea paʻa inu a i ʻole ka lima inu, he mea hoʻohana kaulana i hoʻolālā ʻia e mālama i nā mea inu ʻoiai e hāʻawi ana i kahi ʻoluʻolu.

Hoʻohana nui ʻia nā koozies mai ka neoprene a i ʻole nā ​​​​huhū, hoʻohana nui ʻia nā koozies i nā pāʻina, nā pīniki, a me nā hanana o waho, e hoʻolilo iā lākou i mea nui no ka hoʻohana pilikino a hoʻolaha.

nā koozies ʻoki laser

2. Nā noi a Koozies

Hāʻawi ʻo Koozies i nā kumu like ʻole, mai ka leʻaleʻa pilikino a hiki i nā mea hana kūʻai kūpono. Hiki iā lākou ke hana maʻamau no nā hanana kūikawā e like me ka male ʻana, ka lā hānau, a me nā hui hui, e hāʻawi ana i kahi hopena kūpono no ka mālama ʻana i nā mea inu ʻoiai ke kānalua nei i nā mea hoʻolaha. Nui nā ʻoihana e hoʻohana i nā koozies ma ke ʻano he hāʻawi, e hoʻonui ana i ka ʻike maka ʻoiai e hoʻohui ana i kahi paʻi o ka pilikino i kā lākou hana kūʻai.

nā koozies ʻoki laser

Ke ʻike nei i nā mea hou no nā huahana Koozie!

3. CO2 Laser Compatibility me Koozie Materials

Me ka holomua o ka ʻokiʻoki laser a me ka ʻenehana engraving, ua hoʻonohonoho ʻia ka hana ʻana o nā koozies e hana i kahi hoʻololi hoihoi. Eia kekahi mau polokalamu hou:

ʻO nā mea e like me ka hupa a me ka neoprene, i hoʻohana mau ʻia i ka hana koozie, kūpono loa me ka ʻoki ʻana a me ke kahakaha ʻana o ka laser CO2. Hāʻawi kēia ʻano hana i nā ʻoki maʻemaʻe a pololei me ka ʻole o ka hōʻino ʻana i ka mea, a hāʻawi pū i ka hiki ke kahakaha i nā logos, nā ʻano, a i ʻole nā ​​kikokikona pololei ma luna o ka ʻili. Hana kēia i ka hana laser i mea kūpono no ka hana ʻana i nā hoʻolālā maʻamau e mālama i ka lōʻihi a me ka hoʻopiʻi nani.

• Nā Koozies Hoʻokiʻekiʻe Laser

Ke hoʻohana nei i ka ʻenehana ʻokiʻoki laser, hiki i nā mea hana ke hoʻokō i nā ʻano kikoʻī a me nā hoʻolālā maʻamau e kū nei i ka mākeke. ʻO koozie ʻoki ʻoki ʻana i ka laser e hōʻoia i nā kihi maʻemaʻe a me ka maikaʻi kūlike, e ʻae ana i nā manawa hōʻailona kūʻokoʻa a me nā hoʻolālā hoʻolālā e hoʻokō i nā pono o ka mea kūʻai aku.

Ma waho aʻe, ʻaʻohe mea ʻoki make, ʻaʻohe mea hoʻopau i ka wā o ka ʻoki ʻana i nā koozies laser. He ʻano hana hoʻokele waiwai a maikaʻi loa. Me ke kōkua o ka ʻoki ʻana i ka laser, hiki iā ʻoe ke hoʻomaka i ka hana maʻamau a i ʻole ka nui, e pane koke i ke ʻano o ka mākeke.

• Laser Cutting Sublimation Koozies

ʻoki ʻoki ʻana i nā koozies sublimation

No nā koozies paʻi sublimation,nā mīkini ʻokiʻoki laser i hoʻolako ʻia me kahi kamerahāʻawi i kahi pae ʻokoʻa o ka pololei.

Hoʻomaopopo ka pahupaʻikiʻi i nā mamana i paʻi ʻia a hoʻolikelike i ke kaʻina ʻoki e like me ia, e hōʻoia ana e hahai pololei ka mea ʻoki laser i ke ʻano o ka hoʻolālā.

Loaʻa kēia ʻenehana holomua i nā koozies i ʻoki maikaʻi ʻia me nā ʻaoʻao maʻemaʻe, e hāʻawi ana i nā pono nani a me ka hana.

• Laser Engraving Koozies

nā koozies engraving laser

Hāʻawi ke kahakaha laser i kahi ala hoʻomaʻemaʻe e hoʻopilikino i nā koozies.

Inā no nā makana hui, nā ʻoluʻolu mare, a i ʻole nā ​​hanana kūikawā, hāʻawi ke kahakaha laser i kahi pā kila e hoʻohui i ka waiwai i ka huahana.

Hiki ke kālai nani ʻia nā logo a i ʻole nā ​​memo i loko o ka mea, e hōʻoia ana i nā manaʻo lōʻihi.

4. ʻO ka mīkini ʻoki laser kaulana no nā Koozies

MimoWork Laser Series

• Wahi Hana: 1300mm * 900mm (51.2" * 35.4 ")

• Mana Laser: 100W / 150W / 300W

• Laser Tube: CO2 Glass a i ʻole RF Metal Laser Tube

• Ka Māmā ʻoki ʻoki: 400mm/s

• Ka māmā kaha kaha: 2,000mm/s

• Wahi Hana: 1600mm * 1200mm (62.9” * 47.2”)

• Mana Laser: 100W / 130W / 150W

• Pūnaehana Laser: Pūnaehana Kamera CCD

• Laser Tube: CO2 Glass a i ʻole RF Metal Laser Tube

• Ka Māmā ʻoki ʻoki: 400mm/s

• Papa Hana: Papa Hoʻouna

Inā makemake ʻoe i ka mīkini laser no nā koozies, e kamaʻilio me mākou no ka ʻōlelo aʻo hou aku!

Ka hopena

ʻO ka hoʻohui ʻana o ka ʻenehana ʻokiʻoki a me ke kālai ʻana i ka hana koozie e wehe i kahi honua o nā mea hiki i nā mea hana a me nā mea kūʻai aku. Ma ka hoʻomaikaʻi ʻana i ke kaʻina hana, hiki i nā ʻoihana ke hoʻonui i ka hoʻopiʻi aesthetic o nā koozies i ka hāʻawi ʻana i nā mea kūʻai aku me nā huahana pilikino, kiʻekiʻe. Ke hoʻomau nei ka noi ʻana i nā mea kūʻai maʻamau, ʻo ka hoʻopukapuka ʻana i ka ʻenehana laser e hāʻawi i nā mea hana e hoʻokō i kēia mau mākeke e ulu nei a hoʻokau i ka hana hou i ka ʻoihana mea inu.

5. FAQ o Laser Etching Ili

1. Ua palekana anei ka neoprene i ka oki laser?

ʻAe,neoprenepalekana i ka ʻoki ʻana i ka laser, ʻoi aku me ka aCO2 laser, i kūpono no kēia mea.

Eia nō naʻe, he mea nui e hōʻoia i ka neoprene he chlorine-free, no ka mea, hiki i nā mea i loko o ka chlorine ke hoʻokuʻu i nā kinoea ʻino i ka wā o ke kaʻina ʻoki. Paipai mākou iā ʻoe e hoʻolako i kahimea ʻūhūno kāu mīkini ʻokiʻoki laser, hiki ke hoʻomaʻemaʻe maikaʻi a hoʻomaʻemaʻe i ka uahi. E hahai mau i nā alakaʻi palekana, e hoʻohana i ka ventila kūpono, a e nīnau i ka pepa ʻike palekana palekana (SDS) ma mua o ka ʻoki ʻana.

ʻIke hou aku e pili ana i kēlā, hiki iā ʻoe ke nānā i ka ʻaoʻao:Hiki iā ʻoe ke ʻoki i ka Neoprene

2. Hiki iā ʻoe ke kahakaha i nā koozies neoprene?

ʻAe,neoprene koozieshiki ke kahakaha ʻia i ka laser me ka hoʻohana ʻana i kahiCO2 laser. Hoʻokumu ke kalai ʻana i ka laser ma ka neoprene i nā hōʻailona maʻemaʻe i kūpono no nā hoʻolālā maʻamau, logos, a i ʻole kikokikona. He wikiwiki a maikaʻi ke kaʻina hana, hāʻawi i kahi hoʻopau paʻa a pilikino me ka ʻole o ka hōʻino ʻana i ka mea. Hoʻohui ʻia ke kahakaha ʻo Laser i kahi ʻano hoʻopā ʻoihana i nā koozies, e hoʻolilo iā lākou i mea kūpono no nā mea hoʻolaha a i ʻole nā ​​makana pilikino.

Nā loulou pili

Inā he mau nīnau kāu e pili ana i nā koozies ʻoki laser, e kamaʻilio me mākou!

Hiki paha iā ʻoe ke hoihoi

E pili ana i ka ʻoki ʻana i ka huʻa, ua kamaʻāina paha ʻoe i ka uea wela (pahi wela), ka wai jet, a me kekahi mau hana hana kuʻuna.

Akā inā makemake ʻoe e kiʻi i nā huahana ʻoi aku ka pololei a me ka hoʻopilikino ʻia e like me nā pahu hāmeʻa, nā pale kukui kani, a me nā mea hoʻonaninani o loko, ʻo ka ʻoki laser ka mea maikaʻi loa.

Hāʻawi ka ʻoki ʻoki laser i ka ʻoi aku ka maʻalahi a me ka hana maʻalahi ma kahi ʻano hana hoʻololi.

He aha ka mea ʻoki laser foam? He aha ka ʻokiʻoki laser? No ke aha ʻoe e koho ai i kahi ʻokiʻoki laser e ʻoki i ka pua?

ʻO ka ʻili i kālai ʻia ʻo Laser ke ʻano hou i nā papahana ʻili!

ʻO nā kikoʻī i kahakaha ʻia, ʻano maʻalahi a maʻalahi hoʻi ke kahakaha ʻana, a me ka wikiwiki o ke kahakaha ʻana me ka wikiwiki loa!

Hoʻokahi wale nō mīkini engraver laser, ʻaʻohe pono o ka make, ʻaʻohe pono o nā pahi pahi, hiki ke hoʻokō ʻia ke kaʻina hana ʻili i ka wikiwiki wikiwiki.

No laila, ʻaʻole hoʻonui nui ka ʻili kalai laser i ka huahana no ka hana ʻana i nā huahana ʻili, akā he mea hana DIY maʻalahi hoʻi e hālāwai me nā ʻano manaʻo noʻonoʻo no nā mea leʻaleʻa.

Pōhaku kalai laserHe ala ikaika ia e hana ai i nā hoʻolālā paʻakikī a mau loa ma nā mea kūlohelohe.

ʻo kahi laʻana,kalai ʻana i kahi pōhaku pōhakuhiki iā ʻoe ke kālai i nā hiʻohiʻona kikoʻī, logos, a i ʻole kikokikona ma luna o ka ʻili me ka pololei. ʻO ka wela nui o ka laser e wehe i ka papa luna o ka pōhaku, e waiho ana ma hope o kahi kahakaha mau a maʻemaʻe. ʻO nā kahakai pōhaku, he ikaika a kūlohelohe, hāʻawi i kahi kāwele kūpono no nā hoʻolālā pilikino a me nā mea hoʻonaninani, e kaulana ai lākou e like me nā makana a i ʻole nā ​​​​mea maʻamau no nā hale a me nā ʻoihana.

E kiʻi i hoʻokahi mīkini etching laser no kāu ʻoihana Koozies a i ʻole hoʻolālā?


Ka manawa hoʻouna: Oct-14-2024

E hoʻouna i kāu leka iā mākou:

E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou