Pono ʻoe e koho i ka ʻili etching laser - ʻo ia ke kumu!

No ke aha ʻoe e koho ai i ka ʻili etching laser?

Hoʻopilikino, pololei, kūpono

Ua lilo ka ʻili laser etching i mea pono no nā ʻoihana a me nā mea hana, e hāʻawi ana i ka pololei ʻole a me ka hana maʻamau. Inā ʻoe e hana ana i nā ʻili ʻili laser-etched a i ʻole e hoʻopilikino i nā mea ʻili, ʻo nā pōmaikaʻi o ka hoʻohana ʻana i ka mīkini etching laser ʻili he helu ʻole. Eia ke kumu e koho ai ʻoe i ka etching laser ma ka ʻili no kāu papahana aʻe.

E hele pū me mākou a e ʻimi i kahi ʻano o ka ʻili ʻili laser e ʻoluʻolu loa iā ʻoe!

1. Kūlike ʻole a me ka kikoʻī

Ua ʻike mākou he nui nā ʻano hana e kahakaha ai a kahakaha i kāu mau mea ʻili, e like me ke kahakaha ʻana a me ka embossing, ke kālai ʻana i ka pahi, ke kalai ʻana i ka laser, ke kuni ʻana, a me ke kahakaha ʻana o CNC, maikaʻi lākou ma kekahi mau ʻano. Akā i ka wā e pili ana i ka pololei a me ka waiwai o nā kikoʻī a me nā hiʻohiʻona, ʻo ka laser etching ʻo ia ka No.1.

Superpololei kiʻekiʻe a me ka ʻōnaehana hoʻomalu kikohoʻemai ka mīkini ʻili laser etching ʻoihana, hāʻawi i kahi kukuna laser superfine e pili ana i ka ʻili me0.5mm anawaena.

Hiki iā ʻoe ke hoʻohana i ka pono no ke kahakaha ʻana i nā hiʻohiʻona nani a paʻakikī hoʻi i kāu mau mea ʻili e like me nā ʻeke, nā ʻeke, nā ʻāpana, nā lole, nā kāmaʻa, nā mea hana, etc.

ʻili etching laser me nā kikoʻī kikoʻī

Me ka ʻili etching laser, hiki iā ʻoe ke hoʻokō i kahi pae kūpono o ka pololei. Hiki i ka laser beam ke kahakaha i nā hiʻohiʻona paʻakikī a me nā hoʻolālā, e hopena i ka kikoʻī kikoʻī laser-etched. huahana ʻili.

Hana kēia i ka ʻili laser etch i kūpono no ka hana ʻana i nā hana kiʻi maʻamau, ka hōʻailona ʻana, a i ʻole nā ​​hiʻohiʻona ma nā waiwai ʻili.

Laʻana:Nā hōʻailona maʻamau a me nā hiʻohiʻona paʻakikī i kahakaha ʻia ma nā ʻeke a i ʻole nā ​​kāʻei.

Hoʻohana i ka hihia:Pono nā ʻoihana e hoʻohui i nā hōʻailona kikoʻī ma nā ʻili ʻili laser-etched no ka hōʻailona ʻana.

2. Hoʻopilikino ma ka Scale

ʻO kekahi o nā mea maikaʻi loa e pili anakalai laser ma ka ʻiliʻo ia ka hiki ke hoʻololi maʻalahi ma waena o nā hoʻolālā like ʻole me ka ʻole o nā mea hana.Hāʻawi kēia i ka hoʻopilikino piha ʻana, inā paha ʻoe e hana ana ma kahi mea hoʻokahi a i ʻole nā ​​huahana ʻili nui.

ʻO ka hana maʻalahi o ka ʻili etching laser, ma kekahi ʻaoʻao, mai ka kukuna laser maikaʻi, ua like ia me kahi kiko, a hiki ke kaha kiʻi i nā ʻano like ʻole me nā kiʻi vector a me nā kiʻi pixel, e waiho ana i nā kaha kaha a i ʻole nā ​​​​hōʻailona o ke ʻano kūʻokoʻa.

Ma ka ʻaoʻao ʻē aʻe, hele mai ia mai ka mana laser hiki ke hoʻololi a me ka wikiwiki, ʻo kēia mau ʻāpana e hoʻoholo i ka hohonu a me ka ākea o ka ʻili, a pili i kāu ʻano ʻili.

No ka laʻana, inā ʻoe e hoʻohana i ka mīkini ʻili laser etching 100W, a hoʻonoho i ka mana laser i 10% -20%, hiki iā ʻoe ke kiʻi i kahi kahakaha māmā a pāpaʻu paha ma ka ʻili ʻili. He kūpono kēlā i ke kahakaha ʻana i nā logo, nā leka, nā kikokikona, a me nā huaʻōlelo aloha.

Inā hoʻonui ʻoe i ka pākēneka mana, e loaʻa iā ʻoe kahi hōʻailona etching hohonu, ʻoi aku ka waina, e like me ke stamping a me ka embossing.

ʻO ka mea hope akā ʻaʻole ka mea liʻiliʻi loa, hiki ke hoʻoponopono ʻia ka polokalamu kālai laser aloha i kēlā me kēia manawa, inā e hoʻāʻo ʻoe i kāu hoʻolālā ma kahi ʻāpana ʻili a ʻaʻole kūpono, hiki iā ʻoe ke hoʻololi i ke kiʻi hoʻolālā i ka polokalamu, a laila hele i ka hoʻāʻo a loaʻa iā ʻoe kahi hopena maikaʻi loa.

ʻO ka ʻili ʻili laser holoʻokoʻa he maʻalahi a maʻamau, kūpono no nā mea hoʻolālā kūʻokoʻa a me ka poʻe e hana i nā ʻoihana i hana ʻia.

Pōmaikaʻi:Hāʻawi i nā ʻoihana e hāʻawi i nā huahana ʻili pilikino me ka uku ʻole o ka hoʻonohonoho.

Laʻana:Hāʻawi i nā ʻili ʻili laser-etched ma nā ʻeke a me nā ʻeke maʻamau no kahi paʻi pilikino.

Hōʻike wikiō: 3 Mea Hana o ka ʻili ʻili

HANA ILI | Ke koho nei au iā ʻoe e koho i ka ʻili kalakala laser!

3. Maikaʻi ma waena o nā noi

He kūpono ke kālai ʻia laser no ka hapa nui o nā huahana ʻili a me nā ʻano ʻili e like me ka ʻili lau-tanned, nubuck, ka ʻili palaoa piha, ka ʻili PU, ka suede, a me Alcantara like me ka ʻili.

Ma waena o nā lasers he nui, ʻoi aku ka maikaʻi o ka laser CO2 a hiki iā ia ke hana i ka ʻili laser-etched nani a palupalu.

Nā mīkini etching laser no ka ʻilihiki ke hoʻohana ʻia i nā huahana ʻili like ʻole.

Ma waho aʻe o nā hana ʻili o kēlā me kēia lā, nā ʻili ʻili, nā mīkina lima, a me nā mea pale, hiki ke hoʻohana ʻia ka ʻili etching laser i nā kahua kaʻa e like me ka inoa inoa inoa laser etching ma ka huila, nā hiʻohiʻona hōʻailona laser ma ka uhi noho.

Ma ke ala, hiki i ka laser ke ʻoki i nā lua a me nā lua micro i ka uhi noho ʻili e hoʻohui i ka hanu a me ke ʻano. E pili ana i ka mea hiki iā ʻoe ke hana me ka ʻili etching laser, e hele i ka nūhou e ʻike ai:manaʻo ʻili kalai laser

ʻO kekahi mau manaʻo ʻili i kālai ʻia ʻo Laser >>

nā ʻili ʻili etching laser
kūpeʻe lima ʻili laser etching a me nā mea nani ʻē aʻe
ʻili pōhili ʻili laser etching
nā kāmaʻa ʻili etching laser
pēke ʻili etching laser

4. Kiekie ka wikiwiki a me ka pono

Hāʻawi ka mīkini etching laser no ka ʻili i ka wikiwiki a me ka pololei, kūpono ia no nā ʻoihana me nā pono hana nui.

Me ka hoʻonohonoho pono a me ka hana, ka ʻoihanaMea kālai laser ʻili Galvohiki ke hiki i kae kaha ana i ka wikiwiki ma waena o 1 a me 10,000mm/s. A inā i ʻōwili ʻia kāu ʻili, paipai mākou iā ʻoe e koho i ka mīkini laser ʻili me kamea hānai autoapapaʻaina lawe, he mea kōkua i ka hoʻokē ʻai ʻana.

Inā pono ʻoe e hana i nā ʻāpana hoʻokahi a i ʻole nā ​​​​mea hana nui, ʻo ke kaʻina hana ʻili laser etch e hōʻoia i ka manawa hana wikiwiki me ka ʻole o ka hoʻohālikelike ʻana i ka maikaʻi.

Hōʻike wikiō: ʻoki ʻoki a me ke kahakaha ʻana i ka laser wikiwiki ma nā kāmaʻa ʻili

src="Pehea e ʻoki ai i nā kāmaʻa ʻili

Pōmaikaʻi:Kūpono no nā ʻoihana e ʻimi nei e hana i nā mea ʻili laser-etched wikiwiki.

Laʻana:ʻO ka hana wikiwiki o nā kāʻei ʻili a me nā mea hana me nā kahakaha maʻamau.

5. Pili kaiapuni

ʻAʻole like me nā ʻano kalai kuʻuna,nā mīkini etching laser no ka ʻiliʻaʻole koi i ka pili kino, nā kemika, a i ʻole nā ​​​​mea pena. ʻO kēia ka mea i ʻoi aku ka hoʻomau a me ka ʻoluʻolu o ke kaʻina hana, me ka liʻiliʻi o ka ʻōpala i hana ʻia.

Ka hopena:ʻOi aku ka hana ʻili hoʻomau me ka liʻiliʻi o ka hopena kaiapuni.

Pōmaikaʻi:Hiki i nā ʻoihana ʻike Eco ke hoʻohālikelike i kā lākou mau hana me nā kaʻina hana pili kaiapuni.

6. Nā Manaʻo Paʻa a lōʻihi

ʻO nā hoʻolālā i hana ʻia e ka ʻili etching laser he paʻa a kūpaʻa i ka ʻaʻahu. Inā no nā ʻili ʻili a i ʻole nā ​​kahakaha kikoʻī ma nā waiwai ʻili, ʻo ka ʻili laser-etched e hōʻoia i ka lōʻihi o nā hoʻolālā i ka manawa, ʻoiai me ka hoʻohana mau ʻana.

Makemake ʻoe i ka ʻili etching laser?
He mea kōkua kēia mīkini laser iā ʻoe!

Mīkini Laser Etching Popular no ka ʻili

Mai ka MimoWork Laser Machine Collection

• Wahi Hana: 400mm * 400mm (15.7” * 15.7”)

• Mana Laser: 180W / 250W / 500W

• Laser Tube: CO2 RF Metal Laser Tube

• Ka Māmā ʻoki ʻoki: 1000mm/s

• Ka māmā kaha kaha: 10,000mm/s

• Wahi Hana: 1600mm * 1000mm (62.9" * 39.3 ")

• Mana Laser: 100W / 150W / 300W

• Ka Māmā ʻoki ʻoki: 400mm/s

• Papa Hana: Papa Hoʻouna

• Pūnaehana Mana Mana: Belt Transmission & Step Motor Drive

FAQ o ka ʻili etching laser

1. He aha ka ʻili maikaʻi loa no ke kahakaha ʻana i ka laser?

ʻO ka ʻili maikaʻi loa no ka etching laser, ʻo ia ka ʻili i hoʻomaʻamaʻa ʻia ma muli o kona ʻili maoli, ʻaʻole mālama ʻia e pane maikaʻi i ka etching. Hāʻawi ia i nā hopena maʻemaʻe a pololei me ka ʻole o nā kaha kuni nui.

ʻO nā koho maikaʻi ʻē aʻe e pili ana i ka ʻili chrome-tanned a me ka suede, akā makemake paha lākou i nā hoʻonohonoho akahele e pale aku i nā hopena makemake ʻole e like me ka discoloration a i ʻole ke ahi. E hōʻalo i nā ʻili i mālama nui ʻia a i ʻole nā ​​​​ʻili synthetic no ka mea hiki ke hoʻokuʻu i ka uahi pōʻino a hiki ke hopena i ke kālai ʻole ʻia.

Paipai mau ʻia ka hoʻāʻo ʻana i nā ʻāpana ʻōpala e hoʻoponopono i kāu mau hoʻonohonoho.

2. ʻO wai ka laser i kūpono i ka etching ili a me ke kahakaha ʻana?

Hiki i ka laser CO2 a me ka laser diode ke kaha kiʻi a kiʻi i ka ʻili. Akā aia nā ʻokoʻa i ka hopena engraving ma muli o kā lākou mīkini hana a me ka hiki.

ʻOi aku ka ikaika a me ka paʻakikī o ka mīkini laser CO2, hiki iā ia ke hoʻopaʻa i ke kahakaha ʻili ʻili hohonu ma kahi ala. ʻIke loa, hiki mai ka mīkini ʻili etching laser CO2 me ka hana ʻoi aku ka maikaʻi a me nā hopena engraving like ʻole. Akā ʻoi aku ka nui o ke kumukūʻai ma mua o ka laser diode.

ʻOi aku ka liʻiliʻi o ka mīkini laser Diode, hiki iā ia ke hana me ka ʻili ʻili lahilahi me ke kahakaha māmā a me nā kaha etching, inā makemake ʻoe e kiʻi i kahi kahakaha hohonu, ʻaʻohe ala ʻē aʻe e hana i nā hala he nui. A ma muli o kāna wahi hana liʻiliʻi a me ka mana haʻahaʻa, ʻaʻole hiki iā ia ke hoʻokō i ka hana o ka ʻoihana-ʻoihana a me ka hana kiʻekiʻe. hana ʻana

Manaʻo

No ka hoohana oihana:ʻO kahi laser CO2 ma ka laulā 100W-150W he mea kūpono ia no ke kālai ʻili a me ke kahakaha ʻana. Hāʻawi kēia iā ʻoe i ka hui maikaʻi loa o ka pololei a me ka pono.

No nā mea leʻaleʻa a i ʻole nā ​​papahana liʻiliʻi:Hiki i ka laser CO2 mana haʻahaʻa (ma kahi o 40W-80W) a i ʻole ka laser diode ke hana no nā hana kalai māmā.

3. Pehea e hoʻonohonoho ai i ka ʻili etching laser?

• Mana:Haʻahaʻa haʻahaʻa ma mua o ka ʻoki ʻana. E hoʻomaka me kahi 20-50% mana, e pili ana i kāu mīkini laser a me ka hohonu engraving āu e makemake ai.

Ka māmā holo: ʻO nā māmā māmā e hiki ai ke kālai hohonu. ʻO kahi hoʻomaka maikaʻi ma kahi o 100-300 mm / s. Eia hou, hoʻololi e pili ana i kāu mau hoʻāʻo a me ka hohonu i makemake ʻia.

DPI: Hiki i ka hoʻonohonoho ʻana i kahi DPI kiʻekiʻe (ma kahi o 300-600 DPI) ke kōkua i ka hoʻokō ʻana i nā kikoʻī kikoʻī hou aku, ʻoi aku hoʻi no nā hoʻolālā paʻakikī. Akā ʻaʻole ia no kēlā me kēia kūlana, hoʻonohonoho kikoʻī e ʻoluʻolu e nīnau i kahi loea laser ʻoihana.

• E kālele i ka Laser:E hōʻoia i ka nānā pono ʻana o ka laser ma ka ʻili ʻili no ke kalai maʻemaʻe. No ke alakaʻi kikoʻī, hiki iā ʻoe ke nānā i ka ʻatikala e pili anapehea e ʻike ai i ka lōʻihi kikoʻī kūpono.

Hoʻokomo ʻili: Hoʻopaʻa i ka ʻili ma ka moena laser e pale ai i ka neʻe ʻana i ka wā o ke kaʻina hana etching.

4. He aha ka ʻokoʻa ma waena o ka engraving laser a me ka ʻili embossing?

• Laser EngravingHe kaʻina hana kahi e puhi ai ka kukuna laser i ka ʻili o ka ʻili e hana i nā hōʻailona paʻa a pololei. Hāʻawi kēia ʻano hana i nā hoʻolālā kikoʻī, me nā kikokikona maikaʻi, nā hiʻohiʻona paʻakikī, a i ʻole nā ​​kiʻi. ʻO ka hopena he hōʻailona maʻemaʻe, indented ma ka ʻili o ka ʻili.

Hoʻopaʻa ʻanae pili ana i ke kaomi ʻana i ka make wela a i ʻole ke kahakaha ʻana i ka ʻili, e hana ana i kahi hoʻolālā hoʻokiʻekiʻe a hoʻomaha paha. Hana ʻia kēia me ka mechanically, a ʻoi aku ka hopena i ʻekolu-dimensional. Hoʻopili maʻamau ka embossing i nā wahi ʻoi aku ka nui o ka ʻili a hiki ke hana i kahi ʻano maʻalahi, akā ʻaʻole ia e ʻae i ka pae like o ka pololei e like me ke kahakaha ʻana i ka laser.

HANA ILI | Ke koho nei au iā ʻoe e koho i ka ʻili kalakala laser!

5. Pehea e hana ai i ka mīkini etching laser ʻili?

He maʻalahi ka hana ʻana i ka mīkini laser. Hāʻawi ka ʻōnaehana CNC iā ia i ka automation kiʻekiʻe. Pono ʻoe e hoʻopau i nā ʻanuʻu ʻekolu, a no nā mea ʻē aʻe hiki i ka mīkini laser ke hoʻopau iā lākou.

KaʻAnuʻu 1. E hoʻomākaukau i ka ʻili a kau ma luna o kapapa ʻoki ʻoki laser.

KaʻAnuʻu 2. E lawe mai i kāu waihona hoʻolālā ʻili i lokopolokalamu kalai laser, a hoʻonoho i nā ʻāpana laser e like me ka wikiwiki a me ka mana.

(Ma hope o kou kūʻai ʻana i ka mīkini, e ʻōlelo ko mākou loea laser i nā ʻāpana kūpono iā ʻoe e pili ana i kāu mau koi a me nā mea hana.)

KaʻAnuʻu 3. E kaomi i ke pihi hoʻomaka, a hoʻomaka ka mīkini laser e ʻoki a kahakaha.

Inā he nīnau kāu e pili ana i ka ʻili laser etching, e kamaʻilio me mākou!

Inā makemake ʻoe i ka mīkini etching laser ʻili, e hele i ka ʻōlelo aʻoaʻo ⇨

Pehea e koho ai i kahi mīkini etching laser ʻili kūpono?

Nuhou Pili

ʻO ka ʻili i kālai ʻia ʻo Laser ke ʻano hou i nā papahana ʻili!

ʻO nā kikoʻī i kahakaha ʻia, ʻano maʻalahi a maʻalahi hoʻi ke kahakaha ʻana, a me ka wikiwiki o ke kahakaha ʻana me ka wikiwiki loa!

Hoʻokahi wale nō mīkini engraver laser, ʻaʻohe pono o ka make, ʻaʻohe pono o nā pahi pahi, hiki ke hoʻokō ʻia ke kaʻina hana ʻili i ka wikiwiki wikiwiki.

No laila, ʻaʻole hoʻonui nui ka ʻili kalai laser i ka huahana no ka hana ʻana i nā huahana ʻili, akā he mea hana DIY maʻalahi hoʻi e hālāwai me nā ʻano manaʻo noʻonoʻo no nā mea leʻaleʻa.

Ua kaulana ka hana ʻana i ka lāʻau ʻoki ʻoki laser ma nā ʻoihana like ʻole, mai ka hana lima a me nā mea hoʻonaninani i nā kumu hoʻohālike, nā lako, a me nā mea hou aku.

Mahalo i kāna hana maʻamau kumukūʻai, hiki ke ʻoki a me ke kahakaha ʻana, a me ka hoʻohālikelike ʻana me kahi ākea o nā mea lāʻau, ʻoi aku ka maikaʻi o nā mīkini ʻoki laser hana lāʻau no ka hana ʻana i nā hoʻolālā lāʻau kikoʻī ma o ka ʻoki ʻana, ke kahakaha ʻana, a me ka hōʻailona ʻana.

Inā he hobbyist paha ʻoe a he mea hana lāʻau ʻoihana, hāʻawi kēia mau mīkini i ka ʻoluʻolu like ʻole.

ʻO Lucite kahi mea kaulana i hoʻohana nui ʻia i kēlā me kēia lā a me nā noi ʻoihana.

ʻOiai ua kamaʻāina ka hapa nui o ka poʻe i ka acrylic, plexiglass, a me PMMA, kū ʻo Lucite ma ke ʻano he ʻano o ka acrylic kiʻekiʻe.

Aia nā māka like ʻole o ka acrylic, hoʻokaʻawale ʻia e ka mālamalama, ka ikaika, ka pale ʻana, a me ke ʻano.

Ma ke ʻano he acrylic kiʻekiʻe kiʻekiʻe, hele pinepine ʻo Lucite me kahi kumukūʻai kiʻekiʻe.

Hāʻawi ʻia i hiki i nā lasers ke ʻoki i ka acrylic a me ka plexiglass, e noʻonoʻo paha ʻoe: hiki iā ʻoe ke ʻoki i ka laser Lucite?

E luʻu kākou no ka ʻike hou aku.

E kiʻi i hoʻokahi mīkini etching laser no kāu ʻoihana ʻili a i ʻole hoʻolālā?


Ka manawa hoʻouna: Sep-19-2024

E hoʻouna i kāu leka iā mākou:

E kākau i kāu leka ma aneʻi a hoʻouna mai iā mākou