Nlebanya ngwa – Welder Laser Handheld for Metal Welding

Nlebanya ngwa – Welder Laser Handheld for Metal Welding

Laser welder ejiri aka

Welding laser Vs TIG Welding: Kedu nke ka mma?

Mgbado ọkụ Laser vs TIG Welding

Site natupu ịgbado ọkụnhicha, nkeọnụ ahịanke mkpuchi gasmaka ma laser weld na tig, naịgbado ọkụusoro, na nkeịgbado ọkụike, ihe onyonyo a atụnyeretig vs laserịgbado ọkụbụ ụzọ a na-atụghị anya ya.

Maka ịgbado ọkụ laser ịbụ nwa ọhụrụ gburugburu ngọngọ,ụfọdụ nghọtahie anọwo na-abịa, na eziokwu bụ na ọ bụghị naanị laser ịgbado ọkụ igwe bụmfe ịmụta, ma na ezigbo wattage,ịgbado ọkụ laser nwere ike dị ka ịgbado ọkụ.

Ọ bụrụhaala na usoro gị na ike gị ziri ezi, ịgbado ọkụigwe anaghị agba nchara or aluminombụ ije n'ime ogige.

Ọkụdọ Laser Handheld Master na nkeji 7

Nna ukwu nka nke ịgbado ọkụ laser ejiri akan'ime naanị nkeji 7na nkuzi nkuzi a zuru oke.

Vidiyo na-eduzi gịusoro na usoro dị mkpa, na-egosipụta ike nke ngwaọrụ ịgbado ọkụ laser ejiri aka.

Mụta ka ị ga-esi nweta welds ziri ezi na nke ọma n'ụzọ dị mfe,na-ekpuchi ihe dị iche iche na ọkpụrụkpụ.

Nkuzi a na-emesi echiche ndị bụ isi dị kausoro nchekwa kwesịrị ekwesị yana ntọala kacha mmamaka dị iche iche ịgbado ọkụ ndapụta.

Kedu ihe bụ Welder Laser Handhled?

Ihe eji weda laser ejiri aka bụngwaọrụ ịgbado ọkụ oberena utilizes laser technology maka nkenke ịgbado ọkụ ngwa.

Nke a kọmpat ngwá ọrụ na-enye ohere welders ịrụ ọrụ nannukwu mgbanwe na nnweta, karịsịa na mpaghara ebe usoro ịgbado ọkụ ọdịnala nwere ike isi ike.

The handheld laser welder na-egosipụtakarị imewe dị fechaa ma na-enye uru dị na yana-abụghị kọntaktị ịgbado ọkụ, na-eme ka njikwa ziri ezi na usoro ịgbado ọkụ.

Weld Laser Handheld: Nleba anya nke ọma

Welder laser igwe aghọwo ndị ọzọ na ndị ọzọ dị ike naugbu a bụ oge kacha mma ịbanye na ya.

Maka ndị welder laser ejiri aka,ịdị mfe nke iji na nhọrọ dị iche iche nke mmepụta ike dị mkpa.

Igwe laser ịgbado ọkụ bụ nhọrọ nke na-adaberekarị na yaihe ị na-achọ weld.

Na-achọ Welder Laser Handheld dabara gị mma?

Chọrọ ịmata ihe igwe ịgbado ọkụ laser ejiri aka nwere ike?

Igwe Laser Welder: Ihe ise ị tụfuru

Weld laser ejiri aka bụ ihe ga-eme n'ọdịnihumana emere ya n'oge ugbu a.

Mana ọtụtụ teknụzụ ọhụrụ maka ogbako, ebe a bụIhe ise ị maghịigwe laser welder.

Site na gas mkpuchi dị iche iche gaa na ọrụ 3-in-1, maka igwe ịgbado ọkụ laser igwe.

Lelee vidiyo a ka ịhụ ma ihe niile anyị kwuru gbasara ịgbado ọkụ laser bụ ihe ị maralarị maka ya.

Igwe ịgbado ọkụ laser ejiri aka maka ọla)

Ngwọta Welding Laser dị iche iche

Iji nwetakwuo ịrụ ọrụ nke ọma na ịdị mma nke ịgbado ọkụ, teknụzụ ịgbado ọkụ laser pụtara wee mepụta akwa akwa laser dị iche iche dabere na ihe ọla dị iche iche na ihe ịgbado ọkụ chọrọ.

A na-eji ihe eji welder laser ejiri aka mee iheìhè & kọmpat igwe size na mfe operability, na-apụta na ịgbado ọkụ igwe na ụgbọ ala, ụgbọ mmiri, ikuku, akụkụ eletriki, na mpaghara arịa ụlọ.

Dabere na ọkpụrụkpụ ọla dị iche iche na ihe ịgbado ọkụ chọrọ, ị nwere ike ịhọrọ welder nke na-adabara gị n'okpuru.

Kedu otu esi ahọrọ ike laser kwesịrị ekwesị maka metal welded gị?

Ụdị ọla dị iche iche na ọkpụrụkpụ ígwè chọrọ ike laser kwekọrọ iji ruo ogo ịgbado ọkụ laser kacha mma.

Ụdị ahụ na-enyere gị aka ikpebi egwuregwu ịgbado ọkụ kacha mma.

Max Welding ọkpụrụkpụ maka dị iche iche ike

  500W 1000W 1500W 2000W
Aluminom 1.2mm 1.5mm 2.5mm
Igwe anaghị agba nchara 0.5mm 1.5mm 2.0mm 3.0mm
Carbon ígwè 0.5mm 1.5mm 2.0mm 3.0mm
Akwụkwọ galvanized 0.8mm 1.2mm 1.5mm 2.5mm

Chọpụtakwuo banyere Gịnị bụ a Laser welder na otu esi eji ya!

gbadaa

Gịnị mere Họrọ Handheld Fiber Laser Welder

Uru nke Laser Welding Handheld

ịgbado ọkụ laser uru ọ dịghị ọnya

Enweghị ọnyà weld

laser ịgbado ọkụ na-erite uru ezigbo ịgbado ọkụ onuete-02

Ọnụ mmiri weld dị nro

laser ịgbado ọkụ uru ọ dịghị deformation

Enweghị nrụrụ

✔ Oke arụmọrụ:

Mmepụta ọkụ dị ike na nnyefe ike ngwa ngwa na-eduga na arụmọrụ dị elu nke oge 2 ~ 10 nke usoro ịgbado ọkụ ọdịnala.

✔ Mpaghara Okpomọkụ emetụtara obere:

Dabere na ntụpọ laser lekwasịrị anya, njupụta ike laser pụtara obere mmetụta ịhụnanya na enweghị nrụrụ na metal welded.

✔ Emecha Welding adịchaghị:

Ụzọ ịgbado ọkụ laser na-aga n'ihu bụ nhọrọ iji ruo ezigbo ịgbado ọkụ na ike ịgbado ọkụ maka ụdị ọla dị iche iche.

✔ Ọ dịghị mgbe emechaa:

Ịgbado ọkụ laser otu ngafe nwere àgwà ịgbado ọkụ ka mma na-ewepụ ọnya weld na porosity weld. Ọ dịghị post-polishing a chọrọ, na-azọpụta oge na ike.

✔ Ndakọrịta zuru oke:

Ịgbado ọkụ laser na-akwado ụzọ ịgbado ọkụ dị iche iche, alloys, ezigbo ọla na ịgbado ọla ndị yiri ya.

✔ Na-agbanwe agbanwe & Ọrụ dị mfe:

Egbe welder laser ejiri aka na eriri eriri mbugharị nwere ogologo ogologo na-adabara usoro ịgbado ọkụ laser niile. Na mfe operability na integrated welder imewe.

Ntụle: Laser Welding VS Arc Welding

 

Mgbado ọkụ laser

Arc Welding

Oriri ike

Dị ala

Elu

Mpaghara Okpomọkụ metụtara

Opekempe

Nnukwu

Nrụpụta ihe

Ọ dị obere ma ọ bụ enweghị nrụrụ

Degharịa ngwa ngwa

Ebe ịgbado ọkụ

Ebe ịgbado ọkụ dị mma na mgbanwe

Nnukwu ntụpọ

Nsonaazụ ịgbado ọkụ

Ọnụ ịgbado ọkụ dị ọcha na-enweghị nhazi ọzọ achọrọ

Achọkwu ọrụ Polish

Oge usoro

Oge ịgbado ọkụ dị mkpirikpi

Na-ewe oge

Nchekwa onye ọrụ

Ir-radiance ìhè na-enweghị mmerụ

Igwe ọkụ ultraviolet siri ike na radieshon

Mmetụta gburugburu

Enyi na gburugburu ebe obibi

Ozone na nitrogen oxides (na-emerụ ahụ)

Achọrọ gas nchekwa

Argon

Argon

Nchịkọta igwe ịgbado ọkụ laser ejiri aka

E jiri ya tụnyere ịgbado ọkụ ọdịnala, ịgbado ọkụ laser dị mfe ma dịkwa nchebe ijikwa maka onye mbido.

The obere laser welder na a kọmpat igwe size na mfe welder Ọdịdị ma kwụsiri ike bụ adaba iji na nwere ogologo ọrụ ndụ.

N'ihi ntụpọ laser gbadoro anya, okpomọkụ dị ike nwere ike gbazee ma mee ka ọla dị iche iche na-eku ume na obere oge, na-eduga na nkwonkwo ịgbado ọkụ siri ike na-enweghị porosity.

Keyhole na conduction mmachi ịgbado ọkụ dị site n'ịgbanwe ike laser.

Ọzọkwa, a na-emepụta isi laser wobble iji gbasaa obosara nke ịgbado ọkụ na oke ndidi.

Dabere na ntugharị ngwa ngwa nke isi welder laser, nha nke ebe ịgbado ọkụ na-adaba okpukpu abụọ, na-eme ka ọdịiche dị ukwuu dị na akụkụ ma tinye ha ọnụ.

Ntuziaka maka ịrụ ọrụ nke Welder Laser Handheld

ịgbado ọkụ laser ejiri aka 02

▷ Otu esi eji aka welder laser

Nzọụkwụ 1:Gbanwuo wee lelee injin na ngwaọrụ buut dị ka bọtịnụ mberede, chiller mmiri

Nzọụkwụ 2:Tọọ paramita ịgbado ọkụ laser kwesịrị ekwesị (mode, ike, ọsọ) na njikwa njikwa, mezie ogologo oghere

Nzọụkwụ 3:Debe ígwè ahụ ka a na-agbado ma mezie ogologo ebe a na-atụgharị uche

Nzọụkwụ 4:Jidere egbe welder laser wee malite ịgbado ọkụ laser

Nzọụkwụ 5:Akwụkwọ ntuziaka na-achịkwa ụdị nke ịgbado ọkụ laser ruo mgbe emechara

▷ Ntị na ndụmọdụ

# Ehulatala eriri eriri ka ọ bụrụ ogo 90

# Yiri ihe nchebe dị ka iko na-agbado ọkụ laser na uwe aka

# Lezienụ anya na mpaghara ntụgharị uche mgbe Laser na-agbado ihe ndị na-atụgharị uche nke ukwuu

# Tinye egbe ịgbado ọkụ laser n'elu ihe mgbado ọkụ mgbe ịgbado ọkụ gasịrị

Mụtakwuo maka Otu esi arụ sistemu ịgbado ọkụ ọkụ

Ngwa ịgbado ọkụ laser

Igwe ịgbado ọkụ laser ejiri aka maka ọla)

ígwè ịgbado ọkụ laser

• Bras

• Aluminom

• Galvanized ígwè

• ígwè

• Igwe anaghị agba nchara

• Carbon ígwè

• Ọla kọpa

• Gold

• Ọlaọcha

• Chromium

• nickel

• Titanium

Ndakọrịta sara mbara nke ihe welded

Nhọrọ laser welder nozzles na-akwadoro maka ụzọ ịgbado ọkụ dị iche iche na akụkụ ịgbado ọkụ.

Ị nwere ike ịhọrọ ụdị laser kwesịrị ekwesị - laser na-aga n'ihu na laser modulated dị ka ọkpụrụkpụ ihe si dị.

Nnukwu mgbanwe maka ihe ịgbado ọkụ na àgwà ịgbado ọkụ dị elu na-akpali usoro ịgbado ọkụ laser ka ọ bụrụ usoro nrụpụta kachasị mma na ama ama na mpaghara ụgbọ ala, ahụike, arịa ụlọ na mpaghara elektrọn.

Welder laser ejiri aka 01

Kedu ihe bụ ịgbado ọkụ laser

The handheld fiber laser welder utilized fusion welding to work on things.

Okpomọkụ siri ike sitere na beam laser agbaze ma ọ bụ vaporizes metal akụkụ ahụ, nke na-ejikọta ya na igwe ọzọ ka ọ na-ajụ oyi ma na-esiwanye ike, na-eme njikọ ịgbado ọkụ siri ike.

N'iji ike dị elu na ike lekwasịrị anya, igwe a na-eme ka ịgbado ọkụ ngwa ngwa na obere ebe okpomọkụ na-emetụta. Usoro ịgbado ọkụ ya na-abụghị nrụgide na-ebelata mmebi nke workpiece.

Na mgbakwunye, okpomoku gbadoro anya na-ebelata ike na ịgbado ọkụ ihe oriri, na-ewepụ mkpa maka elektrọd na igwe ihe n'ọtụtụ ọnọdụ.


Zitere anyị ozi gị:

Dee ozi gị ebe a ziga anyị ya