Kakaretso ea Kopo - Papali ea Wood

Kakaretso ea Kopo - Papali ea Wood

Laser Cut Puzzle Lehong

Na u ntse u leka ho fumana mokhoa oa ho etsa papali ea papali? Ha ho hlokahala ho nepahala le ho nepahala ho phahameng haholo, li-cutters tsa laser hangata ke khetho e ntle ka ho fetisisa.

Mokhoa oa ho etsa "Laser Cut Puzzle".

Mohato oa 1:Beha thepa ea ho itšeha (boto ea lehong) holim'a flatbed

Mohato oa 2:Kenya faele ea Vector ka har'a Lenaneo la ho Seha Laser 'me u etse Liteko tsa Liteko

Mohato oa 3:Matha Sehahi sa Laser ho Seha Papali ea Lehong

laser khaola lehong puzzle

Ho itšeha ka laser ke eng

Ona ke ts'ebetso ea ho seha lisebelisoa ka beam ea laser, joalo ka ha lebitso le fana ka maikutlo. Sena se ka etsoa ho fokotsa thepa kapa ho thusa ho e seha ka mefuta e rarahaneng eo ho ka bang thata hore lithupelo tse ling tsa setso li sebetse. Ntle le ho seha, li-cutter tsa laser li ka boela tsa raster kapa tsa theola meralo holim'a lisebelisoa tsa mosebetsi ka ho futhumatsa bokaholimo ba sesebelisoa le ho phunya bokaholimo ba thepa ho fetola ponahalo moo ts'ebetso ea raster e phethetsoeng.

Li-cutters tsa laser ke lisebelisoa tse molemo bakeng sa ho etsa prototyping le ho etsa; li sebelisoa ke lik'hamphani tsa hardware / li-start-ups / makerspaces ho haha ​​​​li-prototypes tse theko e tlaase, tse potlakileng, le ke baetsi le ba chesehelang thepa e le 'sebetsa' sa maiketsetso sa digital ho tlisa pōpo ea bona ea digital lefatšeng la sebele.

Melemo ea Laser Cut Lehong Puzzle

  Bophahamo bo phahameng boo e fanang ka bona bo lumella ho seha libopeho tse rarahaneng le ho ba le maqeba a hloekileng.

Sekhahla sa tlhahiso se eketsehile.

Mefuta e mengata ea lisebelisoa e ka khaoloa ntle le ho baka tšenyo.

E sebetsa le lenaneo lefe kapa lefe la vector, joalo ka AutoCAD (DWG) kapa Adobe Illustrator (AI).

Ha e hlahise lithōle tse lekanang le tsa sawdust.

Ka lisebelisoa tse nepahetseng, ho bolokehile haholo ho sebelisoa

Ho bohlokoa hape ho ela hloko hore mochini o sehang oa laser ha o na karolo ea bohlokoa feela ho seheng lipuzzle tsa patsi empa o na le mekhoa e metle ea ho betla e lebisang ho lipaterone tse ntle tse nang le lintlha tse ntle tse hanyetsanang le phello ea khatiso ea dijithale. Kahoo sehahi sa lepolanka sa jigsaw laser se sebetsa ka thata ho etsa liphasele tsa lehong.

Keletso ea Lehong Laser Cutter

• Sebaka sa Mosebetsi: 1000mm * 600mm (39.3" * 23.6 ”)

• Matla a Laser: 40W/60W/80W/100W

• Sebaka sa Mosebetsi: 1300mm * 900mm (51.2” * 35.4 ”)

• Matla a Laser: 100W/150W/300W

• Sebaka sa Mosebetsi: 1300mm * 900mm (51.2” * 35.4 ”)

• Matla a Laser: 100W/150W/300W

Khetha mochine oa laser
bakeng sa moralo oa hau oa papali ea lehong!

Ke patsi efe e ntle ka ho fetisisa bakeng sa lipuzzle tsa laser cutting?

Ha u khetha patsi e ntle ka ho fetisisa bakeng sa lipuzzle tsa laser, ho bohlokoa ho khetha lisebelisoa tse bonolo ho li seha le tse tšoarellang, ha li ntse li fana ka likarolo tse boreleli bakeng sa pheletso ea boleng bo holimo. Mona ke mefuta e meng e metle ka ho fetisisa ea patsi bakeng sa lipuzzle tsa laser cutting:

laser cut lehong jigsaw puzzle

1. Baltic Birch Plywood

Hobaneng ho le monate: Baltic Birch ke khetho e tsebahalang bakeng sa lipuzzle tsa laser ho itšeha ka lebaka la bokaholimo ba eona bo boreleli, botenya bo sa fetoheng le ho tšoarella nako e telele. E na le lijo-thollo tse ntle tse khaolang ka mokhoa o hloekileng le ho fana ka likotoana tse matla, tse tšoarellang tse hokahaneng hantle.

Likarolo: Mekhahlelo e mengata ea veneer e etsa hore e tiee, 'me e tšoara lintlha tse rarahaneng hantle, e lumellang likarolo tse bohale tsa puzzle.

Botenya: Hangata, botenya ba 1/8" ho isa ho 1/4" bo sebetsa hantle bakeng sa lipuzzle, ho fana ka tekanyo e nepahetseng pakeng tsa matla le boiketlo ba ho itšeha.

2. Maple Plywood

Hobaneng o le motle: 'Mapa o na le pheletso e boreleli, ea 'mala o bobebe e loketseng ho seha le ho betla ka laser. E thata ho feta li-softwoods tse ling, e leng se etsang hore e be e loketseng ho theha likotoana tsa puzzle tse hlakileng le tse tšoarellang.

Likarolo: Plywood ea 'mapa e fana ka sehiloeng se hloekileng se nang le charring e nyane ebile ha e na monyetla oa ho ferekana.

Botenya: Ho tšoana le Baltic Birch, botenya ba 1/8" ho isa ho 1/4" bo atisa ho sebelisoa bakeng sa lipuzzle.

3. MDF (Medium-Density Fiberboard)

Hobaneng e le ntle: MDF ke thepa e boreleli, e ts'oanang e sehang habonolo ka laser mme e na le pheletso e ts'oanang. E boloka chelete e ngata, 'me bokaholimo bo teteaneng bo etsa hore e be sebaka se loketseng bakeng sa ho betla le ho seha meralo e rarahaneng.

Likarolo: Le hoja e sa tšoarelle nako e telele joaloka plywood, e sebetsa hantle bakeng sa li-puzzle tsa ka tlung 'me e ka fana ka ponahalo e boreleli, e batlang e se na moroallo.

Botenya: Ka tloaelo, 1/8" ho isa ho 1/4" e sebelisetsoa likotoana tsa puzzle. Leha ho le joalo, ho bohlokoa ho etsa bonnete ba hore MDF e na le palo e tlase ea VOCs le formaldehyde, haholo-holo haeba e reretsoe ho lipuzzle tsa bana.

4. Cherry Wood

Hobaneng ho le monate: Cherry wood e fana ka qetello e ntle, e nonneng e fifalang ha nako e ntse e ea, e leng khetho e ntle bakeng sa lipuzzle tsa maemo a holimo. Ho bonolo ho seha ka laser 'me ho hlahisa bohale bo boreleli, bo hloekileng.

Likarolo: Cherry e na le sebopeho se setle se ts'oereng meralo e rarahaneng hantle 'me e fa lipuzzle ponahalo e majabajaba.

Botenya: Cherry e sebetsa hantle ho 1/8" ho isa ho 1/4" botenya bakeng sa lipuzzle.

5. Phaene

Ke hobane'ng ha e le monate: Pine ke lehong le bonolo le bonolo ho le rema, e leng se etsang hore e be khetho e ntle bakeng sa ba qalang kapa ba batlang ho khaola li-puzzle ka theko e tlaase. Ha e teteane joalo ka lifate tse thata, empa e ntse e sebetsa hantle bakeng sa ho itšeha ka laser.

Likarolo: Pine e fana ka chebahalo ea tlhaho ea tlhaho, 'me e loketse meralo e menyenyane, e bonolo haholoanyane.

Botenya: Ka tloaelo, botenya ba 1/8" bo sebelisoa bakeng sa lipuzzle, empa u ka nyolohela ho 1/4" ho latela matla a lakatsehang le qetello.

6. Walnut

Hobaneng ho le monate: Walnut ke patsi e ntle e thata e nang le mebala e metle le lipaterone tsa lijo-thollo tse etsang hore e lokele lihlahisoa tsa lipuzzle. Patsi e teteaneng, e thusang ho etsa likotoana tsa puzzle tse tšoarellang le tsa boleng bo holimo.

Likarolo: E khaola ka mokhoa o hloekileng, 'me' mala o motšo oa walnut o fana ka ponahalo e rarahaneng, e leng se etsang hore e be khetho e ntle bakeng sa lipuzzle tse tloaelehileng, tse mabothobotho.

Botenya: 1/8" ho isa ho 1/4" botenya bo sebetsa hantle.

7. bamboo

Hobaneng e le monate: Bamboo e sebelisana hantle le tikoloho 'me e se e tumme ka ho itšeha ka laser ka lebaka la ho tšoarella ha eona le pheletso e ntle. E na le mokhoa o ikhethang oa lijo-thollo 'me ke mokhoa o tsitsitseng ho feta lifate tse thata tsa setso.

Likarolo: Bamboo e hlahisa likotoana tse hloekileng, 'me e fana ka ponahalo e ntle ea tlhaho, e etsa hore e be e loketseng baetsi ba lipuzzle ba hlokomelang tikoloho.

Botenya: Bamboo hangata e sebetsa hantle ho 1/8" kapa 1/4" botenya.

Laser Cut Holes ka 25mm Plywood

Na ho oa khonahala? Laser Cut Holes ka 25mm Plywood

Qala leeto le chesang ha re ntse re araba potso e tukang: Plywood e sehiloeng ka laser e tenya hakae? Kena, hobane videong ea rona ea morao-rao, re sutumelletsa meeli ka laser ea CO2 e sehang plywood ea 25mm.

Ua ipotsa hore na 450W laser cutter e khona ho sebetsana le tšebetso ee ea pyrotechnic? Tlhokomeliso ea Spoiler - re u utloile, 'me re mothating oa ho hlahisa liketsahalo tse makatsang tse etsahetseng. Plywood e sehang ka laser e nang le botenya bo joalo ha e tsamaee serapeng sa boikhathollo, empa ka tlhophiso e nepahetseng le litokisetso, e ka utloahala e le papali ea moea. Itokisetse liketsahalo tse tukang le tse nang le linoko tse tla u siea u hloletsoe ha re ntse re tsamaea lefatšeng la boselamose ba CO2 laser-cutting!

Mokhoa oa ho Seha le ho Feta Thuto ea Lehong

Ikakhele ka setotsoana lefatšeng la boselamose la ho rema le ho betla patsi ka video ea rona ea morao-rao, tsela ea hau ea ho qala khoebo e atlehileng ka Mochini oa Laser oa CO2! Re tšolla liphiri, re fana ka malebela a bohlokoa le ho nahanela ho etsa mehlolo ka lehong. Ha se lekunutu - patsi ke moratuoa oa Mochini oa Laser oa CO2, 'me batho ba ntse ba hoeba ho tloha ho tse robong ho isa ho tse hlano ho qala likhoebo tse ruisang tsa mapolanka.

Empa ts'oara maballo a laser, hobane patsi ha se taba ea mofuta o le mong. Re e arola ka mekhahlelo e meraro: Hardwood, Softwood, le Wood Processed Wood. Na u tseba litšobotsi tse ikhethang tseo ba nang le tsona? Utulla liphiri 'me u fumane hore na hobaneng patsi e le seile bakeng sa menyetla e metle ka Mochini oa Laser oa CO2.

Seha & Engrave Wood Tutorial | Mochini oa laser oa CO2

Hobaneng U Khetha MIMOWORK Laser Cutter

Re inehetse ho hlahisa mechine ea laser ea boleng bo holimo ka lilemo tse ka bang 20. Ho thusa likhoebo le batho ka bomong ho iketsetsa li-jigsaw puzzles tsa lehong tse se nang lerole le litšila. Re sebelisa li-laser tsa morao-rao tse nepahetseng 'me re sebelisa software e khethehileng, ho etsa bonnete ba hore ho na le ho khaola ho hoholo ho ka khonehang.

Lisebelisoa tse Amanang | lepolanka laser cut puzzles

• Lehong le thata

Plywood

MDF

• 1/8" Baltic Birch

• Li-veneers

• Lehong la Balsa

• Sefate sa Maple

• Linden Wood

Lits'ebetso tse Tloaelehileng: Papali ea Terei, Papali ea Lehong ea 3D, Puzzle ea Cube, Puzzle ea ho kheloha, Lebokose la Lipapali tsa Lehong, Papali ea Sliding Block...

Re molekane oa hau ea khethehileng oa laser!
Lipotso life kapa life mabapi le mokhoa oa ho etsa lipuzzle ka mochini oa laser


Re romelle molaetsa oa hau:

Ngola molaetsa wa hao mona mme o re romele wona