China Laser Cutting Wood Die Board Factory - Pulsed Laser Cleaner (100W, 200W, 300W, 500W) – MimoWork Laser

Online Inquiry

Product Detail

Product Tags

Feedback (2)

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Flatbed Laser Cutter Machine Usa , Contour Laser Cutter Uses , Contour Laser Cutter Install , Our intention is to assist clients understand their ambitions. We are earning wonderful attempts to realize this win-win predicament and sincerely welcome you to be a part of us.

China Laser Cutting Wood Die Board Factory - Pulsed Laser Cleaner (100W, 200W, 300W, 500W) – MimoWork Laser Detail:

SPECIFICATIONS

FEATURES

CLEANING WAYS

APPLICATIONS

(portable laser cleaning machine for metal & non-metal)

Technical Data

Max Laser Power	100W	200W	300W	500W
Laser Beam Quality	<1.6m²	<1.8m²	<10m²	<10m²
(repetition range) Pulse Frequency	20-400 kHz	20-2000 kHz	20-50 kHz	20-50 kHz
Pulse Length Modulation	10ns, 20ns, 30ns, 60ns, 100ns, 200ns, 250ns, 350ns	10ns, 30ns, 60ns, 240ns	130-140ns	130-140ns
Single Shot Energy	1mJ	1mJ	12.5mJ	12.5mJ
Fiber Length	3m	3m/5m	5m/10m	5m/10m
Cooling Method	Air Cooling	Air Cooling	Water Cooling	Water Cooling
Power Supply	220V 50Hz/60Hz
Laser Generator	Pulsed Fiber Laser
Wavelength	1064nm

* laser powers – laser cleaner size

* pulse width – heat affected area

* fiber cable length – movement flexibility

How to select suitable laser cleaning configuration?

Inquire us

Superiority of Pulsed Fiber Laser Cleaner

▶ Non-Contact Processing

Exposure to the rusted metal workpieces to high-concentrated light energy, laser cleaners remove the contaminant through the combined effect of evaporation, ablation treatment, impulse wave, and thermoelastic stress. No cleaning medium is required in the whole rust removal process, the laser cleaning process avoids the problem of damaging the base material from the traditional physical polishing cleaning or cleaning the additional chemical residual from the chemical cleaning method.

▶ Environmentally Friendly

The smoke dust that is generated from the vaporization of the surface coating materials can be collected by the fume extractor and discharged into the air through purification, such a way minimizes the pollution to the environment and health concerns from the operators.

▶ Multi-function

By simply adjusting the power parameter, one can remove the surface dirt, coated paint, rust, and film layer from the metal, oxide, or inorganic non-metal materials with the same laser cleaning machine. This is an absolute advantage that any other traditional cleaning method does not have.

▶ Low Operating and Maintenance Cost

Compared with sandblasting and dry ice cleaning, laser cleaning does not require additional consumables, cutting down the operating costs from the first day.

Comparison: laser cleaning VS other cleaning methods

	Laser Cleaning	Chemical Cleaning	Mechanical Polishing	Dry Ice Cleaning	Ultrasonic Cleaning
Cleaning Method	Laser, non-contact	Chemical solvent, direct contact	Abrasive paper, direct contact	Dry ice, non-contact	Detergent, direct-contact
Material Damage	No	Yes, but rarely	Yes	No	No
Cleaning Efficiency	High	Low	Low	Moderate	Moderate
Consumption	Electricity	Chemical Solvent	Abrasive Paper/ Abrasive Wheel	Dry Ice	Solvent Detergent
Cleaning Result	spotlessness	regular	regular	excellent	excellent
Environmental Damage	Environmental Friendly	Polluted	Polluted	Environmental Friendly	Environmental Friendly
Operation	Simple and easy to learn	Complicated procedure, skilled operator required	skilled operator required	Simple and easy to learn	Simple and easy to learn

Enhance cleaning efficiency and quality with a portable fiber laser cleaner

⇨ Make a profit from it now

How to performe the laser cleaning appropriately – 4 Methods

Various Laser Cleaning Ways

◾ Dry Cleaning

– Use the pulse laser cleaning machine to directly remove rust on the metal surface

◾ Liquid Membrane

– Soak the workpiece in the liquid membrane, then use the laser cleaning machine for decontamination

◾ Noble Gas Assist

– Target the metal with the laser cleaner while blowing the inert gas onto the substrate surface. When the dirt is removed from the surface, it will be blown off immediately to avoid further surface contamination and oxidation from the smoke

◾ Noncorrosive Chemical Assist

– Soften the dirt or other contaminant with the laser cleaner, then use the noncorrosive chemical liquid to clean (commonly used for cleaning stone antiques)

Samples of Fiber Laser Cleaning

laser-cleaner-application-02

• Metal surface de-rusting

• Graffiti removal

• Remove paint and de-scaling paint removal

• Surface stains, engine oils and cooking grease of removal

• Surface plating and powder coating of removal

• Pre-treatment and post-treatment for welding (surface, joints and welding slag)

• Clean cast mold, injection mold, and tire mold

• Stone and antique repairment

▶ Send your materials and demands to us

MimoWork will help you with material testing and laser cleaning guide !

Material Testing

Related Laser Cleaning Machine

continuous-wave-laser-cleaner-01

Continuous Laser Cleaner

handheld-laser-cleaner-01

Handheld Laser Cleaner

rust-laser-remover-01

Rust Laser Remover

Any questions about the laser cleaner machine price

Product detail pictures:

Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of China Laser Cutting Wood Die Board Factory - Pulsed Laser Cleaner (100W, 200W, 300W, 500W) – MimoWork Laser , The product will supply to all over the world, such as: Denmark , Colombia , Pretoria , Our products are mainly exported to Europe, Africa, America, the Middle East and Southeast Asia and other countries and regions. We have enjoyed a great reputation among our customers for quality products and good services.We would make friends with businessmen from at home and abroad, following the purpose of "Quality First, Reputation First, the Best Services."

China Acrylic Die Board Laser Cutting Supplier

Dual Heads Laser Cutting Machine

Flatbed Laser Cutter Wood

Galvo Co2 Laser Marking Machine

Galvo Laser Perforation

How Much Is A Die Cutting Machine

How To Laser Cut Vinyl Records

Laser Cut Mat Board

Laser Cutting On Fabrics

Laser Machine Acrylic Cutting

Adhering to the business principle of mutual benefits, we have a happy and successful transaction, we think we will be the best business partner.

By Nicci Hackner from Costa Rica - 2017.06.22 12:49

This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!

By Christian from panama - 2018.11.04 10:32