China Wholesale Ccd Laser Cutter Manufacturers Suppliers - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser

Online Inquiry

Product Detail

Product Tags

Feedback (2)

We know that we only thrive if we can guarantee our combined rate competiveness and good quality advantageous at the same time for Textile Laser Cutting Machine , Laser Cut Headband , Ccd Laser Cutter , We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.

China Wholesale Ccd Laser Cutter Manufacturers Suppliers - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser Detail:

SPECIFICATIONS

STRUCTURE & OPTION

APPLICATIONS

CLEANING WAYS

(high-power laser cleaner for metal and non-metal)

Technical Data

Laser Power	1000W	1500W	2000W	3000W
Clean Speed	≤20㎡/hour	≤30㎡/hour	≤50㎡/hour	≤70㎡/hour
Voltage	Single phase 220/110V, 50/60HZ	Single phase 220/110V, 50/60HZ	Three phase 380/220V, 50/60HZ	Three phase 380/220V, 50/60HZ
Fiber Cable	20M
Wavelength	1070nm
Beam Width	10-200nm
Scanning Speed	0-7000mm/s
Cooling	Water cooling
Laser Source	CW Fiber

* Sigle Mode / Optional Multi-Mode:

Single galvo head or double galvo heads option, allowing the machine to emit light flecks of different shapes

Selecting a suitable laser cleaning configuration?

Inquire us

Superiority of CW Fiber Laser Cleaner

▶ Cost-effectiveness

Continuous wave fiber laser cleaner has the ability to clean larger size of areas such as building facilities, and metal pipes. Higher speed and steady laser output ensure high repetition for mass cleaning. Plus, no consumables and low maintenance costs enhance the competition in cost-effectiveness.

▶ Lightweight Design

The continuous wave handheld laser cleaner adopts special lightweight materials, greatly reducing the laser gun weight. That’s convenient for operators to use for a long time especially for cleaning large metal construction. Precise cleaning location and angle are easy to realize with the light laser cleaner gun.

▶ Multi-function

Tunable laser power, scanning shapes and other parameters allow the laser cleaner to flexibly clean different pollutes on various base materials. It can remove resin, paint, oil, stains, rust, coating, plating and oxide layer that are widely used in ships, auto repair, rubber molds, injection molds, high-end machine tools, and rails cleaning. This is an absolute advantage that any other traditional cleaning method does not have.

▶ Optimized Design

A sturdy laser cleaner cabinet covers the important four parts: fiber laser source, water chiller, handheld laser cleaner gun, and digital control system. Compact machine size but strong structure body is qualified in various working environments and laser cleaning for different materials. The optical fiber cable has a low energy consumption and can be customized in length. And the optimized optical path design enhances movement stability and reliability during cleaning

▶ Environmentally Friendly

Laser cleaning in an environmental treatment on metal and non-metal surfaces. Due to no consumables for chemicals, or grinding tools, the investment and cost are lower compared with traditional cleaning methods. And laser cleaning does not produce dust, fume, residues, or particles thanks to the extraction and filtration from the fume extractor.

(Further improve production and benefits)

Upgrade Options

3-in-1-laser-gun

3 In 1 Laser Welding, Cutting and Cleaning Gun

Fume Extractor

Boost your cleaning efficiency and quality with the CW laser cleaner with high power

⇨ How to pick one suitable laser solution

Samples of CW Laser Cleaning

CW-laser-cleaing-applications

Large Facilities Cleaning: ship, automotive, pipe, rail

Mold Cleaning: rubber mold, composite dies, metal dies

Surface Treatment: hydrophilic treatment, pre-weld and post-weld treatment

Paint removal, dust removal, grease removal, rust removal

Others: urban graffiti, printing roller, building exterior wall

▶ Send your materials and demands to us

MimoWork will help you with material testing and laser cleaning guide !

Material Testing

How to perform the laser cleaning appropriately – 4 Methods

Various Laser Cleaning Ways

◾ Dry Cleaning

– Use the pulse laser cleaning machine to directly remove rust on the metal surface

◾ Liquid Membrane

– Soak the workpiece in the liquid membrane, then use the laser cleaning machine for decontamination

◾ Noble Gas Assist

– Target the metal with the laser cleaner while blowing the inert gas onto the substrate surface. When the dirt is removed from the surface, it will be blown off immediately to avoid further surface contamination and oxidation from the smoke

◾ Noncorrosive Chemical Assist

– Soften the dirt or other contaminant with the laser cleaner, then use the noncorrosive chemical liquid to clean (commonly used for cleaning stone antiques)

Comparison: laser cleaning VS other cleaning methods

	Laser Cleaning	Chemical Cleaning	Mechanical Polishing	Dry Ice Cleaning	Ultrasonic Cleaning
Cleaning Method	Laser, non-contact	Chemical solvent, direct contact	Abrasive paper, direct contact	Dry ice, non-contact	Detergent, direct-contact
Material Damage	No	Yes, but rarely	Yes	No	No
Cleaning Efficiency	High	Low	Low	Moderate	Moderate
Consumption	Electricity	Chemical Solvent	Abrasive Paper/ Abrasive Wheel	Dry Ice	Solvent Detergent
Cleaning Result	spotlessness	regular	regular	excellent	excellent
Environmental Damage	Environmental Friendly	Polluted	Polluted	Environmental Friendly	Environmental Friendly
Operation	Simple and easy to learn	Complicated procedure, skilled operator required	skilled operator required	Simple and easy to learn	Simple and easy to learn

Related Laser Cleaning Machine

Pulse Laser Cleaner

Rust Laser Remover

non-metal-laser-cleaner-02

Non-metal Laser Cleaner

Any questions about the laser cleaner machine price

Product detail pictures:

Related Product Guide:

Our company insists all along the quality policy of "product good quality is base of enterprise survival; buyer fulfillment will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff" and also the consistent purpose of "reputation very first, shopper first" for China Wholesale Ccd Laser Cutter Manufacturers Suppliers - CW Laser Cleaner (1000W, 1500W, 2000W) – MimoWork Laser , The product will supply to all over the world, such as: Lyon , Colombia , Kuala Lumpur , Insisting on the high quality generation line management and customers expert assistance, we now have designed our resolution to offer our buyers using the to start with amount getting and just after services practical experience. Maintaining the prevailing friendly relations with our buyers, we however innovate our solution lists all of the time to satisfy the brand new demands and adhere to the most up-to-date development of the market in Malta. We are ready to face the worries and make the improve to understand all the possibilities in international trade.

China Die Board Cutter

China Laser Cutting Acrylic Die Board Manufacturers

China Laser Die Board Cutting Machine Supplier

Flatbed Fiber Laser Cutter Wood

Laser Cut Fibre-Reinforced Materials

Laser Cutting Printing Machine

Laser Die Board Cutting Machine Factories

Laser Machine To Cut Acrylic

Wholesale Acrylic Die Board Laser Cutter Quotes

Wholesale Wood Die Borad Laser Cutter Manufacturers

The customer service staff is very patient and has a positive and progressive attitude to our interest, so that we can have a comprehensive understanding of the product and finally we reached an agreement, thanks!

By Renee from Paris - 2018.05.15 10:52

This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.

By Austin Helman from Irish - 2018.06.28 19:27