China Wholesale Contour Laser Cutter Instructions Manufacturers Suppliers - 90W Laser Cutter – MimoWork Laser

Online Inquiry

Product Detail

Product Tags

Feedback (2)

Now we have superior devices. Our solutions are exported to your USA, the UK and so on, enjoying a superb name between customers for Laser Cut Foam , Flatbed Laser Cutter And Engraver , Home Cnc Laser Cutting Machine , We can easily offer you by far the most aggressive prices and good quality, because we've been much additional Specialist! So please will not hesitate to call us.

China Wholesale Contour Laser Cutter Instructions Manufacturers Suppliers - 90W Laser Cutter – MimoWork Laser Detail:

SPECIFICATIONS

HIGHLIGHTS

WATCH VIDEO

APPLICATION

90W Laser Cutter – Lets your imagination run wild with it

Technical Data

Working Area (W *L)	1000mm * 600mm (39.3” * 23.6 ”) 1300mm * 900mm(51.2” * 35.4 ”) 1600mm * 1000mm(62.9” * 39.3 ”) <Customized Table Sizes Available>
Software	Offline Software
Laser Power	90W
Laser Source	CO2 Glass Laser Tube or CO2 RF Metal Laser Tube
Mechanical Control System	Step Motor Belt Control
Working Table	Honey Comb Working Table or Knife Strip Working Table
Max Speed	1~400mm/s
Acceleration Speed	1000~4000mm/s2

* More sizes of laser working table are customizable

* Higher Power Laser Tube are customizable

working-table

▶ Customizable Working Table Available: The 90W Laser Cutter is suitable to cut and engrave on solid materials such as acrylic and wood. Honey comb working table and knife strip cutting table can carry the materials and help to reach best the cutting effect without dust and fume that can be sucked into and purified.

<a href="https://www.mimowork.com/working-table/" title=">> Discover laser cutting tables” target=”_blank”>
>> Discover laser cutting tables

<a href="https://www.mimowork.com/fume-extractor/" title=">> Discover laser fume extractor” target=”_blank”>
>> Discover laser fume extractor

Highlights of Modern Engineering

90W CO2 Laser Cutter

Auto-Focus-01

Auto Focus

It is mainly used for metal cutting. You may need to set a certain focus distance in the software when the cutting material is not flat or with different thickness. Then the laser head will automatically go up and down, keeping the same height & focus distance to match with what you set inside the software to achieve a consistently high cutting quality.

Servo-Motors-01

Servo Motors

A servomotor is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is a signal (either analog or digital) representing the position commanded for the output shaft. The motor is paired with some type of position encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero, and the motor stops. Servo motors ensure higher speed and higher precision of the laser cutting and engraving.

Ball-Screw-01

Ball & Screw

A ball screw is a mechanical linear actuator that translates rotational motion to linear motion with little friction. A threaded shaft provides a helical raceway for ball bearings which act as a precision screw. As well as being able to apply or withstand high thrust loads, they can do so with minimum internal friction. They are made to close tolerances and are therefore suitable for use in situations in which high precision is necessary. The ball assembly acts as the nut while the threaded shaft is the screw. In contrast to conventional lead screws, ball screws tend to be rather bulky, due to the need to have a mechanism to re-circulate the balls. The ball screw ensures high speed and high precision laser cutting.

Mixed-Laser-Head

Mixed Laser Head

A mixed laser head, also known as a metal non-metallic laser cutting head, is a very important part of the metal & non-metal combined laser cutting machine. With this professional laser head, you can cut both metal and non-metal materials. There is a Z-Axis transmission part of the laser head that moves up and down to track the focus position. Its double drawer structure enables you to put two different focus lenses to cut the materials of different thicknesses without adjustment of focus distance or beam alignment. It increases cutting flexibility and makes the operation very easy. You can use different assist gas for different cutting jobs.

Want to further increase its Potential with upgrades?

Inquire us

Video of Laser Cutting Christmas Ornaments (Wood)

Turning Wood into Festive Christmas Ornaments

Materials Like Acrylic, Wood, Paper, Plastic, Glass, MDF, Plywood, Laminates, Leather, and other Non-metal Materials are commonly processed by the 90W Laser Cutter.

Products like Signs(signage), Crafts, Jewelry, Key chains, Arts, Awards, Trophies, Gifts and etc are often produced by the 90W Laser Cutter.

China Wholesale Contour Laser Cutter Instructions Manufacturers Suppliers - 90W Laser Cutter – MimoWork Laser

Product Detail

Product Tags

Related Video

Feedback (2)