China Wholesale Flatbed Laser Cutter For Sale Factories Quotes - CO2 Laser Cutter For Paper (Cardboard) – MimoWork Laser

SPECIFICATIONS

STRUCTURE FEATURES

UPGRADE OPTIONS

SAMPLES

RELATED PRODUCTS

Technical Data

Structure Features

◼ Vacuum Table

The vacuum table can fix the paper on the honey comb table especially for some thin paper with wrinkles. Strong suction pressure from the vacuum table can guarantee the materials remain flat and stable to realize accurate cutting. For some corrugated paper like cardboard, you can put some magnets attached to the metal table to further fix materials.

◼ Air Assist

Air assist can blow the smoke and debris from the surface of the paper, bringing a relatively safe cutting finish without excessive burning. Also, the residue and accumulative smoke block out the laser beam through the paper, whose harm is especially obvious on cutting the thick paper, like cardboard, so proper air pressure need to be set to get rid of the smoke while not blowing them back to the paper surface.

Upgrade Options for you to choose

CCD Camera

For the printed paper like business card, poster, sticker and others, accurate cutting along the pattern contour is of significant importance. CCD Camera System offers contour cutting guidance by recognizing the feature area, which is easy to operate and eliminates unnecessary post-processing.

Servo Motors

Servo motors ensure higher speed and higher precision of the laser cutting and engraving. A servomotor is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is a signal (either analog or digital) representing the position commanded for the output shaft. The motor is paired with some type of position encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero, and the motor stops.

Brushless DC Motors

Brushless DC (direct current) motor can run at a high RPM (revolutions per minute). The stator of the DC motor provides a rotating magnetic field that drives the armature to rotate. Among all the motors, the brushless dc motor can provide the most powerful kinetic energy and drive the laser head to move at tremendous speed. MimoWork’s best CO2 laser engraving machine is equipped with a brushless motor and can reach a maximum engraving speed of 2000mm/s. You only need small power to engrave graphics on the paper, a brushless motor equipped with the laser engraver will shorten your engraving time with greater accuracy.

Customized laser solutions to boost your business

Tell us your requirements

Contact Us

Special Applications for paper

<a href="https://www.mimowork.com/laser-cutting-paper/" title=">> More Paper Laser Cutting” target=”_blank”>
>> More Paper Laser Cutting

Samples of paper cutting & engraving

Related Laser Machine

Galvo Laser Marker 40

• High-speed laser engraving and cutting

• Dynamic laser beam

Contour Laser Cutter 90

• CCD Camera laser cutter

• Compact and small machine size

MimoWork Laser can meet you !

Professional and affordable paper laser cutter

Contact Us

We’ve designed laser systems for dozens of clients
Add yourself to the list!

Contact Us