China Wholesale Use Of Laser Cutting Machine Factories Pricelist - Flatbed Laser Cutter 130L – MimoWork Laser
China Wholesale Use Of Laser Cutting Machine Factories Pricelist - Flatbed Laser Cutter 130L – MimoWork Laser Detail:
Advantages of Flatbed Laser Cutter
A Giant Leap in Productivity
Technical Data
| Working Area (W * L) | 1300mm * 2500mm (51” * 98.4”) |
| Software | Offline Software |
| Laser Power | 150W/300W |
| Laser Source | CO2 Glass Laser Tube |
| Mechanical Control System | Belt Transmission & Servo Motor Drive |
| Working Table | Knife Strip Working Table |
| Max Speed | 1~300mm/s |
| Acceleration Speed | 1000~3000mm/s2 |
R&D for Processing Acrylic And Wood
Belt Drive
A belt is a looped strip of flexible material used to mechanically link two or more rotating shafts. A belt drive offers smooth transmission of power between shafts at a considerable distance. Belt drives are used as the source of motion to transfer to efficiently transmit power or to track relative movement. In the motion of belt drive, power transmission results make one side of the pulley more tightened compared to the other side. In horizontal drives, the tightened side is always kept on the lower side of two pulleys because the sag of the upper side slightly increases the angle of the folding of the belt on the two pulleys. Belt drives are simple and economical.
Servo Motors
A servomotor is a closed-loop servomechanism that uses position feedback to control its motion and final position. The input to its control is a signal (either analog or digital) representing the position commanded for the output shaft. The motor is paired with some type of position encoder to provide position and speed feedback. In the simplest case, only the position is measured. The measured position of the output is compared to the command position, the external input to the controller. If the output position differs from that required, an error signal is generated which then causes the motor to rotate in either direction, as needed to bring the output shaft to the appropriate position. As the positions approach, the error signal reduces to zero, and the motor stops. Servo motors ensure higher speed and higher precision of the laser cutting and engraving.
Fields of Application
Laser Cutting for Your Industry
Advertising & Gifts
A clear and smooth edge without chipping
Digital Printing
Clean and smooth edge with thermal treatment
Common materials and applications
of Flatbed Laser Cutter 130L
We’ve designed laser systems for dozens of clients
Add yourself to the list!
Product detail pictures:
Related Product Guide:
Our merchandise are commonly identified and dependable by end users and will meet continually altering financial and social desires for China Wholesale Use Of Laser Cutting Machine Factories Pricelist - Flatbed Laser Cutter 130L – MimoWork Laser , The product will supply to all over the world, such as: Portland , Dubai , Bhutan , In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Astrid
from Lesotho
- 2017.03.28 12:22
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Meroy
from Greek
- 2018.05.22 12:13
Related PRODUCTS
-
China Wholesale Laser Cut Camping Sleeping Bags...
-
China Wholesale Laser Cutter For Paper Factorie...
-
China Wholesale Laser Cutting Sublimation Spand...
-
China Wholesale Laser Cut Rally Pennants Quotes...
-
Die Board Cutting Machine Quotes - 60W CO2 Las...
-
China Die Board Laser Cutting Machine Pricelist...