Many people are confused with the focal length adjustment when using a laser machine.
To answer the questions from clients, today we will explain the specific steps and attention to how to find the right CO2 laser lens focal length and adjust it.
Table of Content:
What is Focal Length For the CO2 Laser Machine
For a laser machine, the term "focal length" usually refers to the distance between the lens and the material being processed by the laser.
This distance determines the focus of the laser beam that concentrates the laser energy and has a significant impact on the quality and precision of the laser cutting or engraving.
Operation Method - Determining CO2 laser focal length
Step 1: Prepare Materials
Let’s look at the laser engraving machine and start our tutorial today.
To focus the laser all you're gonna need is two pieces of cardboard.
Step 2: Find the CO2 Focal Length
The lens in your laser head focuses the laser beam down into a fine point, like a triangle.
It is the point where the laser light concentrates with the most powerful light energy.
The focal length can be quite different, depending on the type of lens you have in your laser head.
To start you need to make sure that one piece of cardboard is on an angle, use one scrap to wedge the cardboard.
Now engrave a straight line on your piece of cardboard with the laser.
When that's done, take a close look at your line and find the point where the line is the thinnest.
Use the focal ruler to measure the distance between the smallest point you marked and the tip of your laser head.
This is the right focal length for your particular lens.
For the focal ruler, you can always make your own with your laser engraving machine.
If you want to get the design file of the focal ruler for free, send us an email.
Step 3: Double Confirm the Focal Length
Shoot the laser to the cardboard at different heights, and compare the actual burning marks to find the correct focal length.
Put the cardboard scrap evenly on the working table and move the laser head over it at 5 millimeters high.
Next, press the “pulse” button on your control board to leave burning marks.
Repeat the same procedure, change the laser head to different heights, and press the pulse button.
Now, compare the burning marks and find the smallest spot engraved.
You can choose either method to find the correct focal length.
Video Demonstration | How is the Focal Length of a Lens Determined
Some Suggestions
How to Set Appropriate CO2 Laser Focus Distance?
For Laser Cutting
When cutting materials, we usually suggest adjusting the focus spot slightly below the material to get the best cut.
For example, you can adjust the laser head to 4mm or even 3mm above the material (When the Focal Length is 5mm).
In this way, the most powerful laser energy will be concentrated inside the material, better to cut through the thick material.
For Laser Engraving
But for laser engraving, you can move the laser head above the material surface a little bit higher.
When the Focal Length is 5mm, move it to 6mm or 7mm.
This way, you can get a blur engraving result and enhance the contrast between the carving effect and raw materials.
How to Select the Right Laser Lens?
We also suggest choosing a suitable lens based on materials and requirements.
A shorter focal length like 2.0" means a smaller focal spot and focal tolerance, suitable for laser engraving high DPI pictures.
For laser cutting, a longer focal length can guarantee cutting quality with a crisp and flat edge.
2.5" and 4.0" are more suitable choices.
The longer focal length has a deeper cutting distance.
I list a table here regarding the focal lens choices.
Any Questions About How to Choose Suitable CO2 Laser Lens for Your Application
Recommended CO2 Laser Machine:
For Laser Cutting Thick Material
Another Method to Find CO2 Laser Focus
For thick acrylic or wood, we suggest the focus should lie in the middle of the material.
Laser testing is necessary for different materials.
How thick acrylic can be laser cut?
High power and lower speed is usually a well-advice choice, for a more detailed procedure you can inquire us!
Learn More About How is the Focal Length of a Lens Determined
Post time: Sep-04-2023