Sethunya sa letsoho sa laser cleaner se hokahana le thapo ea faeba ka bolelele bo itseng 'me ho bonolo ho fihlela lihlahisoa tse lokelang ho hloekisoa ka har'a mefuta e mengata.Ts'ebetso ea matsoho e bonolo ebile e bonolo ho e tseba.
Ka lebaka la thepa e ikhethang ea laser ea fiber, ho hloekisa ka laser ho nepahetseng ho ka bonoa ho fihlela boemo bofe kapa bofe, le matla a laolehang a laser le likarolo tse ling.lumella litšila hore li tlosoe ntle le tšenyo ea thepa ea motheo.
Ha ho lisebelisoa tse hlokahalangntle le ho kenya motlakase, e leng ho baballang litšenyehelo le ho baballa tikoloho.
Ts'ebetso ea ho hloekisa ka laser e nepahetse ebile e nepahetse bakeng sa litšila tse holim'a metsi joalo kamafome, mafome, pente, ho roala, le tse ling, kahoo ha ho hlokahale hore ho be le phekolo ea morao-rao kapa mekhoa e meng ea phekolo.
Ts'ebetso e phahameng le matsete a fokolang, empa liphello tse hlollang tsa ho hloekisa.
Sebopeho sa laser se tiileng le se ka tšeptjoang se netefatsa bohloeki ba laserbophelo bo bolelele ba tshebeletsoletlhokomelo e fokolange hlokahalang nakong ea tšebeliso.
Fiber laser beam e fetisa butle-butle ka thapo ea faeba mme ha e na tšenyo ho opareitara.
E le hore lisebelisoa li hloekisoe,lisebelisoa tsa motheo ha li monye beam ea laser e le hore ho se be le tšenyo ho seo.
Ho netefatsa boleng ba laser le ho nahana ka katleho ea litšenyehelo, re hlomella sehloekisi ka mohloli oa laser oa boemo bo holimo, o nang le tlhahiso e tsitsitseng ea khanya le bophelo ba ts'ebeletso.ha feela 100,000h.
Ho hokahana le thapo ea fiber e nang le bolelele bo itseng, sethunya sa letsoho sa laser cleaner se ka sisinyeha le ho potoloha ho ikamahanya le boemo ba workpiece le angle, ho matlafatsa motsamao oa ho hloekisa le ho feto-fetoha ha maemo.
Sistimi ea taolo ea laser ea ho hloekisa e fana ka mekhoa e fapaneng ea ho hloekisa ka ho behalibopeho tse fapaneng tsa ho skena, lebelo la ho hloekisa, bophara ba sekhahla, le matla a ho hloekisa.
'Me mosebetsi oa li-parameter tsa laser pele o boloka o thusa ho boloka nako.
Phepelo e tsitsitseng ea motlakase le phetisetso ea data e nepahetseng e thusa ho sebetsa hantle le boleng ba tlhoekiso ea laser.
Matla a Laser a Matla | 100W | 200W | 300W | 500W |
Laser Beam Quality | <1.6m2 | <1.8m2 | <10m2 | <10m2 |
(lethathamo la ho pheta-pheta) Pulse Frequency | 20-400 kHz | 20-2000 kHz | 20-50 kHz | 20-50 kHz |
Pulse Length Modulation | 10ns, 20ns, 30ns, 60ns, 100ns, 200ns, 250ns, 350ns | 10ns, 30ns, 60ns, 240ns | 130-140ns | 130-140ns |
Matla a Shot a le Mong | 1 mJ | 1 mJ | 12.5mJ | 12.5mJ |
Bolelele ba Fiber | 3m | 3m/5m | 5m/10m | 5m/10m |
Mokhoa oa ho Pholisa | Pholiso ea Moea | Pholiso ea Moea | Pholiso ea Metsi | Pholiso ea Metsi |
Phepelo ea motlakase | 220V 50Hz/60Hz | |||
Laser jenereithara | Pulsed Fiber Laser | |||
Wavelength | 1064nm |
Matla a Laser | 1000W | 1500W | 2000W | 3000W |
Hloekileng Lebelo | ≤20㎡/hora | ≤30㎡/hora | ≤50㎡/hora | ≤70㎡/hora |
Palo ea li-volts | Mokhahlelo o le mong 220/110V, 50/60HZ | Mokhahlelo o le mong 220/110V, 50/60HZ | Karolo e meraro ea 380/220V, 50/60HZ | Karolo e meraro ea 380/220V, 50/60HZ |
Cable ea Fiber | 20M | |||
Wavelength | 1070nm | |||
Bophara ba Beam | 10-200nm | |||
Lebelo la ho skena | 0-7000mm/s | |||
Ho phodisa | Pholiso ea metsi | |||
Mohloli oa Laser | CW Fiber |
* Mokhoa o le mong / Mekhoa e mengata ea boikhethelo:
Single Galvo Head kapa Double Galvo Head Options, e lumella mochine ho ntša Light Flecks ea Libopeho tse sa tšoaneng.
Ho hloekisa ka Microelectronics:Semiconductor Component, Microelectronic Device (Pulse)
Tokiso ea Khale:Seemahale sa Lejoe, Lebenkele la Boronse, Khalase, Penta ea Oli, Mural
Ho Hloekisa Mold:Hlobo ea Rabara, e Kopantsoeng ea Shoa, Metal e Shoa
Kalafo ea Bokaholimo:Kalafo ea Hydrophilic, Pre-weld le Post-weld Treatment
Shipping Hull Cleaning:Ho Tlosa Penta le Ho Tlosa Mafome
Tse ling:Graffiti ea Urban, Printing Roller, Mohaho oa Kantle oa Lerako, Pipe
◾ Libopeho tse fapaneng tsa ho hloekisa lia fumaneha (Mohala, Selika-likoe, Sebopeho sa X, joalo-joalo)
◾ Bophara bo Fetohang ba Sebopeho sa Beam ea Laser
◾ Matla a ho Hloekisa Laser a Fetohang
◾ Maqhubu a Fetohang a Laser Pulse, ho fihla ho 1000KHz
◾ SpinClean Mode ea Fumaneha, e leng Spiral Laser Cleaning Mode ho etsa bonnete ba hore ho na le ho ama ha bonolo mosebetsing.
◾ Ho ka Boloka Litlhophiso tse 8 tse tloaelehileng
◾ Tšehetsa Lipuo Tse Fapaneng